Multi-grinding head SS round pipe rust removal polishing machine

Preparatory work 1.1 Check whether the machine is placed on a flat workbench; Whether the parts are complete, whether the fasteners are loose, do a good job of cleaning. 1.2 Connect the water inlet pipe and the drainage pipe, and pay attention to the drainage place should be lower than the height of the drainage port, otherwise it will affect the discharge of waste liquid. 1.3 Check whether the power supply meets the working requirements, and whether the connection and grounding of each line are safe and reliable.

KONTAKTIRAJTE ZDAJ naloži naloži v pdf

Podrobnosti

Oznake

WX-DWZ Series Multi-station Round Tube Polishing Machine

Glavni namen in področje uporabe:

Round pipe polisher is mainly used for the derusting and polishing of hardware manufacturing, vehicle accessories, hydraulic cylinder, steel and wood furniture, instrument machinery, standard parts and industries before and after electroplating, from rough polishing to fine polishing. Round pipe polisher is the best choice for polishing the round pipe, round rod and slender shaft. The round tube polisher can be equipped with a variety of polishing wheels, such as, Chiba wheel, hemp wheel, nylon wheel, wool wheel, cloth wheel, PVA etc. the guide wheel is stepless speed control, simple and convenient operation, and the steel structure is optimized to make the performance more stable. The reserved fan port can be equipped with a dedusting fan or a wet dedusting system, which can be matched with an automatic loading and unloading mechanism according to the length of the processed parts.

Glavni parametri specifikacije:

(Posebno opremo za poliranje je mogoče prilagoditi glede na zahteve uporabnika)

Projekt Model	WX-DWZ-2	WX-DWZ-4	WX-DWZ-6	WX-DWZ-8	WX-DWZ-10
Vhodna napetost (v)	380V (trifazni štirižični)
Vhodna moč（kw)	8.6	18	26.5	35.5	44
Polirno kolo specifikacija (mm)	250/30040/5032（Širina se lahko sestavi）
Vodilno kolo specifikacija (mm)	100*200
Polirno kolo hitrost (r/min)	3000
Hitrost vodilnega kolesa (r/min)	Brezstopenjska regulacija hitrosti
Premer obdelave (mm)	4-100
Učinkovitost obdelave (m/min)	0-20
Hrapavost površine (um)	Dan 0.02
Dolžina obdelave（mm）	100-6000
Odstranjevanje prahu z mokrim vodnim ciklom	neobvezno
Odstranjevanje prahu s suhim ventilatorjem	neobvezno
Feeding mode of grinding head	Digitalni zaslon, električno nastavljiv
Machine tool Total weight about（kg)	800	1600	2400	3200	4000
Equipment Overall dimension（m)	1.41.21.0	2.61.21.0	3.81.21.0	5.01.21.0	6.21.21.0

Preparatory work

1.1 Check whether the machine is placed on a flat workbench; Whether the parts are complete, whether the fasteners are loose, do a good job of cleaning.

1.2 Connect the water inlet pipe and the drainage pipe, and pay attention to the drainage place should be lower than the height of the drainage port, otherwise it will affect the discharge of waste liquid.

1.3 Check whether the power supply meets the working requirements, and whether the connection and grounding of each line are safe and reliable.

2.2 Starting

2.1 Plug the plug into the power socket and turn on the power.

2.2 Press the green switch to start the device.

Step 3 Run

3.1Paste the fabric on the disc, and apply a small amount of oil on the disc each time to facilitate the replacement of the fabric.

3.2 Press the cover tightly into the tray, and drop an appropriate amount of polishing liquid or polishing paste and water on the surface of the fabric.

3.3 Place a sump container at the outlet of the drain pipe or into a drain for the discharge of waste liquid.

3.4The cover should be covered when not in use to avoid dust or other foreign matter falling into the polishing fabric and affecting the polishing effect later.

1,The round tube polishing machine has high efficiency, good finish, extensive and durable abrasive consumables, etc.

2, the machine has the advantages of simple and convenient operation, stable product performance and low noise, and is well received by the majority of users. Optional cooling system and dust collection system are used to meet different industries. This machine reserved fan port users can also install their own dust removal fan.

3, the machine guide wheel rotation using stepless speed regulation, can better meet the different diameters, different lengths of workpiece grinding or polishing. Because the guide wheel of the machine rotates by stepless speed regulation, the polishing workpiece is more efficient, the finish is better, and the abrasive consumables are extensive and durable.Round tube polishing machine tube has a circle of scratches is what kind of scratches. Common scratches are generally related to the material of polishing (such as sanding, sand grain, etc.); 2. The polishing speed is also related to the polishing direction, which only needs to slow down the speed of the polishing machine, and the direction is one-way.

Multi-round tube polishing machine adopts the principle of centerless grinding, composed of polishing and feeding two major mechanisms, by adjusting the feed of the grinding head, the workpiece can be large margin grinding or fine grinding polishing, by adjusting the guide wheel spacing, the workpiece can be processed by different specifications of the round tube polishing machine, the machine feeding mechanism adopts stepless transmission device, you can change the feed speed of the workpiece. Make the workpiece to achieve the ideal grinding effect.

Če vas zanimajo naši izdelki, lahko svoje podatke pustite tukaj in v kratkem vas bomo kontaktirali.

Tukaj napišite svoje sporočilo in nam ga pošljite

Povezano IZDELKI

Warning: Undefined array key "seo_h1" in /home/www/wwwroot/HTML/www.exportstart.com/wp-content/themes/1046/article-products.php on line 14 Multi-grinding head SS round pipe rust removal polishing machine

Warning: Undefined array key "seo_h1" in /home/www/wwwroot/HTML/www.exportstart.com/wp-content/themes/1046/article-products.php on line 14
Multi-grinding head SS round pipe rust removal polishing machine