What tube sizes can the machine handle?

This machine typically supports round tubes with diameters ranging from 10mm to 250mm, and lengths up to several meters, depending on the model.

What types of surface finishes can be achieved?

It can produce mirror, satin, brushed, or matte finishes by using different polishing wheels and abrasive materials.

Is the machine fully automatic?

Yes, it features automatic feeding, clamping, and polishing, which improves efficiency and reduces manual labor. Some models also support PLC or touchscreen control.

Can it polish other materials besides stainless steel?

While optimized for stainless steel, it can also polish aluminum, copper, and carbon steel tubes with appropriate adjustments and consumables.

What industries is this machine suitable for?

It is widely used in furniture manufacturing, handrail production, decorative metalwork, kitchen equipment, and automotive tubing, where high surface quality is required.

Automatic Stainless Steel Round Tube Polishing Buffing Machine Manufacturer

Auto igwe anaghị agba nchara gburugburu tube polishing igwe

Igwe ihe na-eme ka tube dị okirikiri bụ ngwa eji eme ngwaahịa ọla a na-ejikarị. Ndụ ọrụ na arụmọrụ na-emetụta ọrụ nhazi na àgwà ngwaahịa ozugbo. Iji hụ na arụ ọrụ kwụsiri ike ogologo oge nke igwe polishing tube, anyị kwesịrị ịrụ ọrụ ndị a:

Products Detail

Read More About internal centerless grinding machine

Read More About filmatic for centerless grinder machine

WX Series Single Grinding Head Round Tube Polisher

Main purpose and scope of application:

Round tube polisher is mainly used in hardware manufacturing, vehicle parts,hydraulic cylinders, steel and wood furniture, instrument machinery, standard parts and electroplating industries before and after the rust and polishing. Round tube polishing machine is the best

choice for round tube, round rod, long and thin shaft polishing. Round tube polisher can be installed a variety of polishing wheels, such as Chiba wheel, hemp wheel, nylon wheel, wool wheel, cloth wheel, PVA, etc., guide wheel stepless speed control, simple and convenient

operation, optimize the steel structure to make the performance more stable, the fan can be installed with the fan mouth.

Main specification parameters:

(Special polishing equipment can be customized according to user requirements)

WX Series Single Grinding Head Round Tube Polisher
Project Model	WX-A1-60		WX-A1-120	WX-A2-60	WX-B1-60	WX-B1-120
Input voltage(v)	380V(Three phase four wire)
Input power（kw)	3.5		4.5	6	4.5	4.5
Polishing wheel specification（mm)	2504032（Width can be assembled）
Guide wheel specification(mm)	230*80			230*100	230*120
Polishing wheel speed(r/min)	3000
Guide wheel speed(r/min)	0-120（Stepless speed regulation）
Machining diameter(mm)	1-120	50-180		1-120	1-120	50-180
Processing efficiency（m/min)	0-8
Surface roughness (um)	Ra 0.02
Wet water cycle dust removal	optional			have	optional
Dry fan dust removal	optional			have	optional
Machine tool total weight about（kg)	320		460	860	520	620
Equipment overall dimension（m)	0.70.81.0		0.80.91.0	1.20.91.5	1.00.91.0	1.11.01.0

Igwe ihe na-eme ka tube dị okirikiri bụ ngwa eji eme ngwaahịa ọla a na-ejikarị. Ndụ ọrụ na arụmọrụ na-emetụta ọrụ nhazi na àgwà ngwaahịa ozugbo. Iji hụ na arụ ọrụ kwụsiri ike ogologo oge nke igwe polishing tube, anyị kwesịrị ịrụ ọrụ ndị a:
1.Regular cleaning: A large amount of metal shavings and abrasive particles will be produced during the use of the round tube polishing machine. If it is not cleaned in time, it will increase the risk of equipment wear and failure. Therefore, it needs to be cleaned after each use, and the accumulated material and dust inside the equipment should be cleaned regularly.
2.Regular lubrication: Equipment failure caused by friction and wear is one of the main problems of the polishing machine, so it is necessary to regularly lubricate the friction parts of the equipment to reduce wear and keep the equipment running smoothly.
3.Check the electrical part: check the cables, wiring and switches of the electrical part to ensure that the electrical components work normally and safely, and replace damaged cables and parts in time.
4.Regular replacement of grinding wheels and abrasive belts: grinding wheels and abrasive belts directly affect the processing quality and equipment life, so they need to be replaced regularly according to the frequency and time of equipment use.
5.Regularly test the accuracy of equipment: regularly test the accuracy of equipment, such as measuring the size of parts, surface roughness and other indicators, and deal with abnormalities in time.

Need Our Services And Quotes?
Request a Quote

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.
- name*
- email*
- phone*
- message*