SS staalpyp poleermasjien met poleerwiel

Round pipe polishing machine is a kind of mechanical equipment used for polishing and rust removal of round pipes. Application range of round tube polishing machine: mainly used in automobile, motorcycle, bicycle, household appliances and other manufacturing industries.

The principle of stainless steel pipe polishing machine is to rely on mechanical force to obtain a certain roughness of the surface of the workpiece to reduce the roughness value of the surface of the parts and friction resistance; At the same time, due to the heat generated in the grinding process, it plays a lubricating role, thus improving the wear resistance and fatigue strength of the workpiece.

The working process of the stainless steel round tube polishing machine is as follows:

1. 1.Place the metal workpiece to be processed on the turntable (can also be fixed by fixture), and adjust the position;
2. 2.After starting the power switch button, rotate the handwheel to make the turntable rotate slowly (pay attention to observe whether the motor steering is correct);
3. 3.Stop rotating when the turntable turns to a certain Angle, and then inject the working liquid into the inner hole of the workpiece by manual or electric means (pay attention not to pour too much to avoid overflow and damage to the equipment), and then continue to rotate the handwheel to the required Angle;
4. 4.According to different needs, different speed and pressure can be set to meet different requirements;
5. 5.When the set pressure and time are reached, it can automatically stop working and enter the cooling state.
6. 6.If you need to replace a new workpiece, you can complete the entire processing process by re-operating it according to the above steps.
7. 7.After use, turn off the power switch and drain the water in the sink before leaving the site.